Add Network Traffic Class Rule

The screen creates a traffic class rule to classify the upstream traffic, assign queuing priority and optionally overwrite the IP header TOS byte. A rule consists of a class name and at least one condition below. All of the specified conditions in this classification rule must be satisfied for the rule to take effect. Click 'Save/Apply' to save and activate the rule.

Traffic Class Name:
 
Assign Priority and/or IP Precedence and/or Type Of Service for the class
If non-blank value is selected for 'IP Precedence' and/or 'IP Type Of Service', the corresponding TOS byte in the IP header of the upstream packet will be overwritten by the selected value.

Priority:
IP Precedence:
IP Type Of Service:
 
Specify Traffic Conditions for the class
Enter the following conditions either for IP layer or for the IEEE 802.1p priority.

Protocol:
Source IP Address:
Source Subnet Mask:
Source Port (port or port:port):
Destination IP Address:
Destination Subnet Mask:
Destination Port (port or port:port):
 
802.1p Priority: