Beacon Interval
Beacons are packets sent by an Access Point to synchronize a wireless network.
Specify a Beacon interval value between 1 and 1000.
The default value is set to 100 milliseconds.
DTIM interval
A DTIM(Delivery Traffic Indication Message) is a countdown message for Access Point to inform clients of the next window for listening to broadcast and multicast messages.
When the Access Point has buffered broadcast or multicast messages for
associated clients, it sends the next DTIM with a DTIM Interval value.
AP clients hear the beacons and awaken to receive the broadcast and multicast messages.
Enter a value between 1 and 65535 for the DTIM interval.
The default value for DTIM interval is set to 3.
Wireless Mode
Access Point can be associated by 802.11b or 802.11g clients in mexed mode,
while only allow 802.11g client to associate in G mode.
The default is mexed mode.
TX Rates
Select the transmission rates depending on the speed of your wireless network.
You can select from a range of transmiision speeds, or you can select Auto to let Router
to select automatically.
The default is Auto.
SSID Broadcast
If you don't want to show the SSID information within the Beacon packet, disable the option.
The default is enable.
Speed Enhanced Mode
Enable this options will enhance the wireless throughput(This feature is only useful when client wireless card is Ralink products).
The default is enable.
Antenna Transmit Power
Select the transmit power of antenna.
The default is 10017dbM.
|