Note: These settings are for advanced users. We recommend that you do not change it if you are unsure of what you are doing. If you do run into problems, you can reset the Gateway back to default settings. To do this, insert a pointed object (like a straightened paperclip) into the hole at the back of the Gateway labelled 'Reset'. Press and hold the reset button till the power light starts flashing - then release the button.You will need to run the Install CD that came in your kit again once you reset the Gateway.

Advanced Settings > NAT > Port Triggering

Some applications require that specific ports in the Gateway's firewall be opened for access by the remote parties. Port Trigger dynamically opens up the 'Open Ports' in the firewall when an application on the LAN initiates a TCP/UDP connection to a remote party using the 'Triggering Ports'. The Gateway allows the remote party from the WAN side to establish new connections back to the application on the LAN side using the 'Open Ports'. A maximum 32 entries can be configured.



Application Trigger Open Remove
Name Protocol Port Range Protocol Port Range  
    Start End   Start End