inet apply	Apply
inet cancel	Cancel
inet enable	Enable
inet disable	Disable
inet mac	MAC Address
inet ip	IP Address
inet server	Server IP
inet netmask	Subnet Mask
inet lan2	LAN 2
inet lan2 ip	LAN2 IP Address
inet lan2 netmask	LAN2 Subnet Mask
inet gateway	Default Gateway
inet pri dns	Primary DNS Server
inet sec dns	Secondary DNS Server
inet user	User Name
inet password	Password
inet pass2	Verify Password
inet hostname	Hostname
inet hostname option	(optional)
wan title	Wide Area Network (WAN) Settings
wan introduction	This page allows you to setup your WAN Connection. First select the WAN connection type (Static, DHCP, PPPoE, PPTP), then enter the relevant settings as provided by your ISP.
wan connection type	WAN Connection Type:
wan connection type static	STATIC (fixed IP)
wan connection type dhcp	DHCP (Auto config)
wan connection type pppoe	PPPoE
wan connection type l2tp	L2TP
wan connection type pptp	PPTP
wan protocol opmode	Operation Mode
wan failoverBackup	WAN Failover Backup
wan static mode	Static Mode
wan dhcp mode	DHCP Mode
wan pppoe mode	PPPoE Mode
wan l2tp mode	L2TP Mode
wan pptp mode	PPTP Mode
wan address mode	Address Mode
wan address mode static	Static
wan address mode dynamic	Dynamic
wan mac clone enabled	Enabled
wan mac clone	MAC Clone
wan optional	(optional)
wan internetHost	Internet Host
wan warningMsg1	Can not get the mac address.
wan warningMsg2	Error. IP address is empty.
wan warningMsg3	It should be a [0-9] number.
wan warningMsg4	IP address format error.
wan warningMsg5	MAC Address should not be empty!
wan warningMsg6	Please fill the MAC Address in correct format! (XX:XX:XX:XX:XX:XX)
wan warningMsg7	Password mismatched!
wan warningMsg8	You must enter the PIN code to enable or disable PIN verification
wan warningMsg9	You need to enter the CORRECT Pin and Puk code since the last code entered was incorrect.
wan warningMsg10	You need to enter the PIN code again since the last code was incorrect. You have
wan attempts	remaining attempts
wan attempt	remaining attempt
wan warningMsg11	You need to unlock the SIM by inputing PIN before disable
lan title	Local Area Network (LAN) Settings
lan introduction	This page allows you to configure the LAN IP address, subnet mask and DHCP settings of your 3G Router.
lan TSintroduction	This page allows you to configure the LAN IP address, subnet mask and DHCP settings of your Smart Hub.
lan setup	LAN Setup
lan dhcp type	DHCP Type
lan dhcp type server	Server
lan dhcp start	Start IP Address
lan dhcp end	End IP Address
lan dhcp lease	Lease Time
lan dhcp static	Statically Assigned
lan stp	802.1d Spanning Tree
lan lltd	LLTD
lan igmpp	IGMP Proxy
lan upnp	UPnP
lan radvd	Router Advertisement
lan pppoer	PPPoE Relay
lan dnsp	DNS Proxy
lan warningMsg1	Error. IP Address or Subnet Mask is empty.
lan warningMsg2	It should be a [0-9] number.\nIn field:
lan warningMsg3	Do not enter Blank Space in this feild
dhcp title	DHCP Client List
dhcp introduction	This page allows you to view the current DHCP client of your 3G Router.
dhcp TSintroduction	This page allows you to view the current DHCP clients that have obtained IP leases from your Smart Hub.
dhcp clients	DHCP Clients
dhcp expire	Expires in
vpn title	VPN Passthrough
vpn introduction	VPN passthrough configurations including: L2TP, IPSec, and PPTP passthrough.
vpn pass thru	VPN Pass Through
vpn l2tp pass thru	L2TP Passthrough
vpn ipsec pass thru	IPSec Passthrough
vpn pptp pass thru	PPTP Passthrough
routing title	Advanced Routing Settings
routing Introduction	This page allows you to configure static and dynamic routing rules for your 3G Router.
routing TSIntroduction	This page allows you to configure static and dynamic routing rules for your Smart Hub.
routing add rule	Add a routing rule
routing routing dest	Destination
routing range	Range
routing netmask	Netmask
routing gateway	Gateway
routing interface	Interface
routing custom	Custom
routing comment	Comment
routing submit	Apply
routing reset	Reset
routing Number	No.
routing del title	Current Routing table in the system:
routing del dest	Destination
routing del netmask	Netmask
routing del gateway	Gateway
routing del flags	Flags
routing del metric	Metric
routing del ref	Ref
routing del use	Use
routing del interface	Interface
routing del comment	Comment
routing del	Delete
routing del reset	Reset
routing host	Host
routing net	Net
routing LAN	LAN
routing WAN	WAN
routing dynamic Title	Dynamic Routing Settings
routing dynamic Title2	Dynamic Routing Protocol
routing dynamic rip disable	Disable
routing dynamic rip enable	Enable
routing dynamic rip apply	Apply
routing dynamic rip reset	Reset
routing warningMsg1	The destination has wrong format.
routing warningMsg2	The netmask has wrong format.
routing warningMsg3	The gateway has wrong format.
routing warningMsg4	please input the destination.
routing warningMsg5	please input the netmask.
routing warningMsg6	please input custom interface name.
routing warningMsg7	Add routing failed
routing warningMsg8	Add routing table
routing warningMsg9	The router's configuration web page may not be reachable from the current ethernet connection. If you have a problem connecting to the router, briefly press the reset button on the router to temporarily change the ethernet port to LAN mode. While the ethernet port is in the this condition, the WLAN LED will blink every half second. Please connect the router again.
routing trueInterface	True Interface
routing customInterface	Custom interface
routing deleteEntry	Delete entry
routing dynamicRouting	Dynamic Routing
routing RIPEnable	RIP Enable
other macAddressSetup	MAC Address Setup
qos title	Quality of Service Settings
qos intro	You may setup rules to provide Quality of Service guarantees for specific applications.
qos setup	QoS Setup
qos str	Quality of Service
qos disable	Disable
qos enable	Enable
qos dscpmarkeronly	mark DSCP only
qos upload bandwidth	Upload Bandwidth:
qos bandwidth custom	User defined
qos download bandwidth	Download Bandwidth:
qos setup submit	Submit
qos setup reset	Reset
qos group	Group
qos group attr	Attribute
qos group modify	Modify
qos rule no	No
qos rule name	Name
qos rule prio	Group
qos rule info	Info.
qos rule add	Add
qos rule del	Delete
qos loaddefault	Load default
qos Rate	Rate:
qos Ceil	Ceil:
qos AF Name	Group Name
qos AF Upload Bandwidth	% of upload bandwidth
qos classifier title	Classifier Settings
qos classifier name	Name
qos classifier group	Group
qos classifier mac	MAC Address
qos classifier dip	Dest. IP address
qos classifier sip	Src. IP address
qos classifier pktlen	Packet Length
qos classifier dscp	DSCP
qos classifier proto	Protocol
qos classifier dport	Dest. port
qos classifier sport	Src. port
qos classifier l7	Application
qos classifier remark	Remark DSCP as:
qos classifier auto	Auto
wwan title	WWAN (3G) Settings
wwan intro	This page allows you to setup your WWAN (Wireless Wide Area Network) connection. Enter the relevant settings as provided by your 3G provider.
wwan help	The unit will default to 'Auto APN Select Mode' if the APN field is blank. You may need to check the APN that is displayed on the Status page while the unit is connecting. If the default APN does not match your SIM account, then you will need to type in the correct APN manually or choose one from the drop down list below.
wwan username	User Name
wwan password	Password
wwan password2	Verify Password
wwan profileName	Profile Name
wwan changeProfileName	Change Profile Name
wwan metric	Interface Metric
wwan opmode	Operation Mode
wwan chooseAPN	Choose an APN here
wwan wwAPN	APN
wwan wwDial	Dial
wwan wwDefault	(default *99#)
wwan wwAuthType	Authentication Type
wwan wwRedialPeriod	Redial Period :
wwan PINsettings	PIN Settings
wwan rememberPIN	Remember PIN
wwan disablePIN	Disable PIN
wwan confirmPIN	Confirm PIN
wwan internet host	Internet Host
wwan confirmPUK	Confirm PUK
wwan confirmMEP	Confirm MEP
wwan SIM not inserted	SIM not inserted
wwan warningMsg1	Error. Internet Host is empty.
wwan warningMsg2	Error. Passwords do not match!
wwan warningMsg3	Please specify Redial Period
wwan warningMsg4	Please specify Idle Time
wwan warningMsg5	Your browser does not support AJAX!
wwan warningMsg6	Unknown SIM status detected -
wwan warningMsg7	Pins are not matching to each other
wwan warningMsg8	PUK codes are not matching to each other
wwan warningMsg9	MEP pins are not matching to each other
wwan warningMsg10	HTML communication error
wwan warningMsg11	Incorrect PIN
wwan warningMsg12	PINs do not match
wwan warningMsg13	PUK codes do not match!
wwan warningMsg14	you must enter the PIN code to enable or disable PIN verification
wwan warningMsg15	Please specify Profile Name
wwan protocol opmode keepalive	Always on
wwan protocol opmode 3gbackup	Automatic 3G backup
wwan protocol opmode ondemand	On Demand
wwan protocol opmode manual	Off
wwan seconds	seconds
wan operation mode keepalive	Keep Alive Mode: Redial Period
wan operation mode ondemand	On demand Mode:
wan operation mode minutes	minutes
wan operation mode idle time	Idle Time
wwan unknownType	Unknown Connection Type
wwan operationFailed	Operation failed
band bandTitle	Band Settings
band intro	This page allows you to set up the frequency band and scan for all the available network operators. You can choose an operator manually from the Operator Name List after scanning.
band operatorSettings	Operator Settings
band selectOperatorMode	Select Operator Mode
band automatic	Automatic
band WCDMAall	WCDMA All
band 2GAll	2G All
band UMTS850MhzOnly	UMTS 850Mhz Only
band autoband	Autoband
band manual3g	Manual 3G
band manual2g	Manual 2G
band manual	Manual
band homePLMN	Current
band registered	registered
band deregistered	deregistered
band available	Available
band unknown	Unknown
band forbidden	Forbidden
band wrak	Weak
band gprs	GPRS
band unknown	Unknown
band operator	Operator
band mcc	MCC
band mnc	MNC
band operatorStatus	Operator Status
band networkType	Network Type
band nameList	Operator Name List:
band scan	Scan
band networkType	Network Type
band currentMode	Current Operator Selection Mode:
band currentRegistration	Current Operator Registration:
band warningMsg1	No operator mode is selected. Please select the operator mode
band warningMsg2	No operator seleced or availble
band warningMsg3	The selected band is not supported
band warningMsg4	Network scan unsuccessful, please try again.
band warningMsg5	Error! Please try again
band warningMsg6_1	The current SIM status is "
band warningMsg6_2	", please make sure the SIM status is OK and try again.
band warningMsg7	Unable to scan network operators whilst 3G data session is enabled, please set the 3G Operation Mode to "OFF" and try again.
band na	N/A
band limitedService	Limited Service