Add Network Traffic Class Rule The screen creates a traffic class rule to classify the upstream traffic, assign queue which defines the precedence and the interface and optionally overwrite the IP header DSCP byte. A rule consists of a class name and at least one condition below. All of the specified conditions in this classification rule must be satisfied for the rule to take effect. Click 'Save/Apply' to save and activate the rule. Traffic Class Name: Rule Order: Rule Status: Disable Enable Specify Classification Criteria A blank criterion indicates it is not used for classification. Class Interface: Local Ether Type: IP(0x800) ARP(0x806) IPv6(0x86DD) PPPoE_DISC(0x8863) PPPoE_SEC(0x8864) 8865(0x8865) 8866(0x8866) 8021Q(0x8100) Ether Type: IP(0x800) Source MAC Address: Source MAC Mask: Destination MAC Address: Destination MAC Mask: Source IP Address Vendor Class ID (DHCP Option 60) User Class ID (DHCP option 77) Source Subnet Mask: Destination IP Address: Destination Subnet Mask: Differentiated Service Code Point (DSCP) Check: default AF13(001110) AF12(001100) AF11(001010) CS1(001000) AF23(010110) AF22(010100) AF21(010010) CS2(010000) AF33(011110) AF32(011100) AF31(011010) CS3(011000) AF43(100110) AF42(100100) AF41(100010) CS4(100000) EF(101110) CS5(101000) CS6(110000) CS7(111000) Protocol: TCP UDP ICMP IGMP UDP/TCP Source Port (port or port:port): UDP/TCP Destination Port (port or port:port): 802.1p Priority Check: 0 1 2 3 4 5 6 7 Specify Classification Results Must select a classification queue. A blank mark or tag value means no change. Assign Classification Queue: Mark Differentiated Service Code Point (DSCP): No Change default AF13(001110) AF12(001100) AF11(001010) CS1(001000) AF23(010110) AF22(010100) AF21(010010) CS2(010000) AF33(011110) AF32(011100) AF31(011010) CS3(011000) AF43(100110) AF42(100100) AF41(100010) CS4(100000) EF(101110) CS5(101000) CS6(110000) CS7(111000) Mark 802.1p priority: 0 1 2 3 4 5 6 7 Tag VLAN ID [0-4094]:
Add Network Traffic Class Rule The screen creates a traffic class rule to classify the upstream traffic, assign queue which defines the precedence and the interface and optionally overwrite the IP header DSCP byte. A rule consists of a class name and at least one condition below. All of the specified conditions in this classification rule must be satisfied for the rule to take effect. Click 'Save/Apply' to save and activate the rule.
Specify Classification Criteria A blank criterion indicates it is not used for classification.
Specify Classification Results Must select a classification queue. A blank mark or tag value means no change.