Wireless -- Security This page allows you to configure security features of the wireless LAN interface. You may choose either Wifi Simple Configuration (WSC) or manual configuration. WSC Setup AP Configure all security settings with an external registar. This will overwrite existing settings. Setup AP: Push-Button PIN Help Manual Setup AP You can set the network authentication method, select data encryption, specify whether a network key is required to authenticate to this wireless network and specify the encryption strength. Click "Save/Apply" when done. Select SSID: Netcomm 7 Series Guest Network Authentication: Open Shared 802.1X WPA WPA-PSK WPA2 WPA2 -PSK Mixed WPA2/WPA Mixed WPA2/WPA -PSK WPA2 Preauthentication: Disabled Enabled Network Re-auth Interval: WPA Pre-Shared Key: Click here to display WPA Group Rekey Interval: RADIUS Server IP Address: RADIUS Port: RADIUS Key: WPA Encryption: WEP Encryption: Encryption Strength: 128-bit 64-bit Current Network Key: Network Key 1: Network Key 2: Network Key 3: Network Key 4:  Enter 13 ASCII characters or 26 hexadecimal digits for 128-bit encryption keys  Enter 5 ASCII characters or 10 hexadecimal digits for 64-bit encryption keys WSC Add Client This feature is available only when WPA PSK or WPA2 PSK is configured. Add a client: Push-Button PIN Click here to display