User Name, Password, Confirm Password. You can change the user name and password here. Type in your new user name, password and confirm it again, and click Save to change the username and password. Please use passwords more than 6 characters and no simple phrases. After you changed the user name and password, the gateway will require you to login with the new user name and password immediately. It is strongly recommended you change the user name and password from the default value to your own setting when your first access to the gateway. Otherwise, the default value is easy for unauthorized person to login.
Enable Management from WAN port. The remote management can be enabled or disabled by clicking the checkbox. When enabled, the user from the Internet can configure the gateway via the web. Otherwise, the web management from the Internet is disabled.
Web Port. The well-known port of the web is 80; if you host your own web site on your LAN for Internet access, please assign a different port number that is unique to your virtual server settings.
Allow Management From PC. Check the box you can restrict management access from the LAN, only the PC with the MAC address specified here can manage the gateway. If you keyed in with wrong MAC and saved accidentally, your PC will lose the access right to the gateway immediately. If that happened, please press the reset button (on the rear side of the gateway) for 5 seconds to restore the gateway to factory default value.
Send System Log To this PC. The gateway will send the system logs to the PC of the IP address specified here. If more than one PC needs this information, you can replicate the message from the system log software.